Skip to main content
  • Products & Solutions
    • Product Portfolios
      • Software
      • Total Stations
      • GNSS
      • Geotechnical
      • Communication
      • Accessories
    • Solutions
      • Transportation Infrastructure
      • Buildings and Structures
      • Dams and Mining
      • Landslides and Natural Hazards
  • Customer Projects
  • Demo Sites
  • Trimble Advantage
  • Blog
  • Contact
Trimble Monitoring
Trimble Monitoring
​

Main navigation

  • Products and Solutions
    • Product Portfolios
      • Software
      • Total Stations
      • GNSS
      • Geotechnical
      • Communication
      • Accessories
    • Solutions
      • Transportation Infrastructure
      • Buildings and Structures
      • Dams and Mining
      • Landslides and Natural Hazards
    • Product Search
    • Search
  • Customer Projects
  • Demo Sites
  • Trimble Advantage
  • Blog
  • Contact

Monitoring Accessories

Prisms & Targets

Prisms & Targets
25mm Monitoring Prism
Small Monitoring Prism

25mm Prism - Box of 25

Mount horizontally or vertically

Prism Constant: -17mm

P/N: 58008030

Trimble Monitoring Prism Datasheet
GNSS/Prism Mounting Assembly
GNSS/Prism Mounting Assembly -40 mm Offset

62mm Prism

5/8th thread mount on top for GNSS receiver

P/N: 58008040

Trimble Monitoring Prism Datasheet
Monitoring Prism with Mounting Assembly
Large Monitoring Prism

Less than 2" with Mounting Assembly

62mm Prism

Prism constant: -40mm

P/N: 58008042

Trimble Monitoring Prism Datasheet
SECO Circular Prism
SECO Circular Prism

 62mm Nitrogen Filled (2") Prism 

Hermetically Sealed

P/N: 6411-00-2

Trimble Monitoring Prism Datasheet
Reflective Foil Target Set
Reflective Foil Target Set

Contains 1 x 25*25mm and 1 x 60*60mm reflective foil target stickers. Only suitable for manual aiming.

Prism Constant: 0mm

P/N: 57012007

asphalt mount
Asphalt Mount for Prisms

Mount for attaching prisms on the road with bolts. The 12.5 mm prism is embedded in a wedge-shaped aluminum plate, used for marking the road edge. The plate can be fixed to the road using screws or special adhesive.

P/N: 4520802-MON

Prism
Mini Monitoring Prism for Horizontal and Vertical Mount

A mini monitoring prism that can be mounted horizontally or vertically. These come in packs of 5. 

  • Prism diameter: 25 mm, 86 mm horizontal axis
  • Offset: -17.5mm/-34mm
  • Achievable target distance of 500 m

 

P/N: 46-MP-MON

Nail Mount for Mini Prism

Nail to adapt prism support for 25 mm mini monitoring prism. Ideal for inserting in the gables of tunnels in concrete walls and walls in general. These come in packs of 10. 

  • Insert depth: 6.5 cm.
  • Chemical fixation block (diameter 8 mm).
  • Overall length: 9.5 cm.

 

P/N: 890314-MON

Show More

Instrument Mounts & Enclosures

Tribrachs
Tribrach without Optical Plumb
Tribrach without Optical Plumb

Replacement Tribrach for Trimble S Series instruments or Trimble Traverse Prism kit. Also compatible with Trimble SX10 instrument.

P/N: 78607007

adaptor
Adapter, SS, Monument, 1 1/2" Pipe

P/N: 2072-30

5142100-01
Total Station Instrument Shelter

The housing is designed for use with Trimble S-Series instruments. Instruments with a similar tilting axis height can be used as well. The field of sight can be extended by cutting the plastic tube. For mounting, the associated adapter is needed. The shelter is 500 mm at the highest point and 370 mm wide including the top rectangular section. The total station line of sight section in the middle is 150 mm high.

Specification Sheet

P/N: 5142100-01-MON

cabinet
Monitoring Cabinet Standard Size

Monitoring cabinet to house the Settop M1 with UPS and charger. All accessories of the Settop M1 fit in this small waterproof box for quick access.

Specification Sheet

P/N: SETTOPM1CABINET-MON

5142100-02
Adapter for Pillar Mounting

Ring including three spacers for screw mounting on top of a concrete pillar. The pillar diameter has to be larger than 350 mm.

Specification Sheet

P/N: 5142100-02-MON

Cabinet
Monitoring Cabinet Extended Size

Monitoring cabinet to house the Settop M1 with UPS and charger. The Extended size cabinet also supports housing up to 2 batteries (depending on model) and a GNSS receiver such as the Trimble NetR9 Ti-M. 

Specification Sheet

P/N: SETTOPM1CAB_BIG-MON

5142110
Adapter for Pillar Plate, Pole and Wall Console

Ring with base protection plate for direct mounting at pillar plate with groove (PN 1510011-02-MON), at the pole adapter (PN 5142120-01-MON or PN 5142120-02-MON) or for mounting at the universal wall console (PN 5141250-MON). By mounting at the wall console three threads M8 have to be tapped. As an option the wall console can be ordered ready for installation of the housing. The ring is 330 mm in diameter and has a height of 35 mm.

Specification Sheet

P/N: 5142110-MON

Security Jail
Total Station Security Jail

Security jail cage for protecting total station from theft. Wall bracket not included.

P/N: 310595-MON

adapter
Adapter for Pole Mounting, up to 70 mm

Plate with adapter for mounting on a pole. Available for different pole diameters: up to 70 mm (PN 5142120-01-MON) and up to 110 mm (PN 5142120-02-MON). 

Specification Sheet

P/N: 5142120-01-MON

adapter
Adapter for Pole Mounting, up to 110 mm

Plate with adapter for mounting on a pole. Available for different pole diameters: up to 70 mm (PN 5142120-01-MON) and up to 110 mm (PN 5142120-02-MON). 

Specification Sheet

P/N: 5142120-02-MON

5142100-10
Safety Ring with Lock

The safety ring covers the mounting screws of the instrument housing to prevent easy access. The ring comes with a lock for added protection. 

Specification Sheet

P/N: 5142100-10-MON

5141250
Universal Console 500 mm

Total station mount, wall console made of robust 500 mm steel angle section. The red coating makes it well visible and corrosion-resistant. The ground plate has a 5/8” thread for instrument mounting. The console will be mounted by using the provided high power dowels, or M12 anchors can be used. As an option the 5/8” thread screw can be delivered separately. Size of the ground mounting plate is 200 x 200 x 10 mm. The steel angle section is 500 mm in length.

Specification Sheet

P/N: 5141250-MON

pillar plate
Pillar Plate

Anodized aluminium plate diameter 140 mm. The three anchor bolts embed into concrete. A 5/8” thread in the center is used for instrument mounting. A cover plate (PN 1510002-MON) to protect the pillar plate is available. The pillar plates have a groove for the instrument housing.

Specification Sheet

P/N: 1510001-02-MON 

pillarplate
Pillar Plate for Screw Mounting

Anodized aluminium plate diameter 140 mm. The three anchor bolts embed into concrete. A 5/8” thread in the center is used for instrument mounting. A cover plate (PN 1510002-MON) to protect the pillar plate is available. The pillar plates have a groove for the instrument housing. 

Specification Sheet

P/N: 1510011-02-MON

1510002
Cover for Pillar Plate

A cover plate to protect the pillar plate.

Specification Sheet

P/N: 1510002-MON

pillar
Pillar Platform for Total Station

Platform concrete pillar and pillar cover. Ideal for installing Total Stations or GNSS antennas. The set consists of:

  • 1 Aluminium base (149×10 mm diameter)
  • 3 Screw brass 5/8 “x 20.
  • 1 PVC Cover (160×38 mm diameter) with a threaded bore 5/8 “

P/N: 890305-MON

Mike 15 4G External Antenna for Settop M1

The Mike 15 4G Antenna is used to extend the range of cellular communications of the Settop M1. This can be used in challenging communication environments or when enclosing the Settop M1 in a monitoring cabinet. This part number includes two antennas.

P/N 60200-MON

 

Show More

Power Supply, Chargers, & Cables

Batteries, Chargers, & Cables
12V Power Supply - Indoor use only
Trimble Optical 12V Power Supply - Indoor Use Only

12V Power supply for Trimble SX10 and S Series instruments. For indoor use only. Worldwide variant comes with adapters for worldwide use.

P/N: 51697-XX*

*XX denotes power cord region
00 = Worldwide
02 = Japan

Dual Slot Battery Charger
Dual Slot Battery Charger

Dual slot battery charger with power supply and cord for your Trimble optical instrument batteries (99511-30) and Trimble GNSS receiver batteries (89840-00 and 92670).

P/N: 101070-00-XX*

*XX denotes power cord region:
01 = North America
02 = Japan
04 = Europe
08 = UK
09 = Taiwan
10 = China
12 = Australia

Lithium Ion Battery
Trimble Instrument Battery

10.8V, 6500mAh

INDUS, 3S2P, 124x74x24.8mm

Lithium Ion battery for use with Trimble SX10 and S Series instruments.

P/N: 99511-30

Autolock Power Kit
Autolock Power Kit

Case for dual slot chargers (58386001) and 2 instrument batteries.

Note, chargers sold separately.

P/N: SLSU-S2018-2

S Series Instrument Cable
S Series Instrument Cable

2.5m Hirose 6 pin to USB

USB cable from PC to Total Station
Plug the USB connector of the cable into the USB socket of the PC and use the 6 pin Hirose connector with the total station.

Grey instrument to USB communication cable for S Series instruments.

P/N: 73840019

Serial Cable
Serial Cable

Serial cable from PC to Total Station.
Plug the serial connector of the cable into the serial socket of the PC and use the 6 pin Hirose connector with the total station.

P/N: 53002021

73835019
Cable - Cigarette Lighter to Hirose 6 Pin

Cable - 3.0m, Cigarette lighter to Hirose 6 pin.

P/N: 73835019

Car Battery to Hirose
Cable - Car Battery to Hirose 6 Pin

Cable - 3.0m, Car battery (croc clips) to Hirose 6 pin

P/N: 73836019

Cable - External 2.4 GHz Radio to PC
Cable - External 2.4 GHz Radio to PC

Cable - 2.5m, Y cable, Hirose 12-pin male to Serial 9-pin female and Hirose 6-pin female

Connects external 2.4 GHz radio to PC (RS232) for real time monitoring with T4D Control software. Requires power supply PN # 78600019-MON

P/N: 53020019

53094001
Cable - 0.1m

Cable - 0.1m, Hirose 6 pin male to Hirose 6 pin female, for auto start up

P/N: 53094001

Charger
11.1V Charger for Settop Battery II

G60-12L3 Charger 11.1V for external UPS battery under Part Number SETTOPBATTERYII-MON.

P/N: 310644-MON

converter
Converter to Fiber UF11

Settop Ethernet to Fiber UF11. Adapter for using with PN 310512-11-MON.

P/N: 310521-10-MON

Fibre
Cable - 500 m Fiber Optics Cable

Fiber optics cable 2ST/2ST 62.5/125 DE 500m. type FLAT. Cable for using with 310512-10-MON.

P/N: 310512-11-MON

Cable
Cable - Trimble S series to Settop M1 4m Cable

Four meter communication cable between Trimble S Series and Settop M1 with Hirose (6-pin) to Lemo (7-pin, COM2).

P/N: 310605-4-MON

Battery
Battery - 11.1 V UPS for Settop M1

11.1V UPS (uninterrupted power supply) for Settop M1. This battery requires an accompanying power supply under part number 310644-MON. 

P/N: SETTOPBATTERYII-MON

Show More

Communication

Communications
Settop M1
Settop M1 Monitoring Device

Settop M1 Monitoring Device, 4G cellular modem

P/N: 110471-01

octohub
Octohub

Octohub, Communications hub for Settop M1.

More Information

P/N: 110471-41

External 2.4GHz Radio
External 2.4GHz Radio

For radio communication to an instrument from a device that does not have a built in radio, such as a computer. It connects via a 12 pin cable connection from the radio to a DB9 connector on the device. 

P/N: 58050019

Show More

Additional Sensors

53002021
Temperature sensor
Temperature Sensor

Temperature sensor (TM-RS232) - 5m cable with metal tip 

P/N: 58008051-TM

Thermometer Cable & Power Supply
Thermometer Cable and Power Supply

Thermometer cable and power supply.

P/N: 110471-61

Show More
Geospatial

Trimble technology has been continuously and automatically monitoring projects for decades, powered by the most trusted surveying technology in the world. Detect movement with confidence using Trimble Monitoring.

More about Trimble, Inc.

  • More about Trimble Geospatial
  • The Trimble Monitoring Advantage
  • Where to Buy
  • Contact Us
  • Do Not Sell My Personal Information
  •  
  •  
  •  
  •  
© Copyright 2023, Trimble Inc. All rights reserved. TERMS OF USE | PRIVACY STATEMENT